Kia Sorento: Description - Ignition System - Engine Electrical SystemKia Sorento: Description

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Ignition System / Description

Ignition timing is controlled by the electronic control ignition timing system.
The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM.
The ignition coil is activated, and timing is controlled.
Ignition System
...
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.   ...
See also:

Front Brake Disc Repair procedures
Removal 1. Disconnect the (-) battery terminal. 2. Remove the front wheel and ...

Declaration of conformity
FCC This sophisticated electronic equipment installed in your Kia Sorento has undergone rigorous testing and proven compliance with the stringent thresholds established for a Class B digital dev ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to Steering System - &quo ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0552