Kia Sorento: Removal - Ignition Switch Assembly - Body Electrical SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Ignition Switch Assembly / Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds.
(Refer to Steering System - "Steering column")

3.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad")
4.
Remove the ignition switch (A) after disconnecting the 6P connector (A).

5.
Remove the key warning and immobilizer connector (A).

6.
Remove the key illumination lens (A).

7.
Remove the key illumination bulb and cover (A).

8.
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder with key ACC.

Inspection
1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for cont...
Installation
1. Install the key lock cylinder. 2. Install the illumination bulb, lens and cover. 3. Install the key warning and immobil...
See also:

Installation
   ...

Head Lamps Removal
   Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turn ...

Specifications
Front Suspension Item Specification Suspension Type Macpherson Strut Shock absorber Type H.P.D (High Performance Damper) C ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0492