Kia Sorento: Emergency Fastening Device (EFD) Removal
Kia Sorento (XM, 2011-2015) Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the EFD cover pad (A).
|
| 3. |
Remove the seat belt after pushing the lock pin with a fiat-tip
screwdriver (B).
|
| 4. |
Remove the door scuff trim. (Refer to the Body group- Interior
trim)
|
| 5. |
Remove the center pillar trim. (Refer to the Body group- Interior
trim)
|
| 6. |
Disconnect the EFD connector (A).
|
| 7. |
Loosen the EFD mounting bolt (B) and remove the EFD.
|
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on driver and passeng...
Emergency Fastening Device (EFD) Description
1.
Remove the ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Emergency Fastening Device (EFD) Installation
See also:
SRSCM Connector terminal
Pin
Function (Connector A)
Pin
Function (Connector B)
1
Ignition
1
Seat belt pretensioner [Driver] High
2
-
...
Canister Close Valve (CCV)
Canister Close Valve (CCV) is installed on the canister ventilation line.
It seals evaporative emission control system by shutting the canister from the
atmosphere when leakage detecting syst ...
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20 ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0829