Kia Sorento: Charging System
Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System
- Description
- On-vehicle Inpection
- Alternator Description
- Alternator Specification
- Alternator Components
- Alternator Circuit Diagram
- Alternator Removal
- Alternator Installation
- Alternator Disassembly
- Alternator Reassembly
- Alternator Inspection
- Battery Description
- Battery Specification
- Battery Components
- Battery Removal
- Battery Installation
- Battery Vehicle parasitic current inspection
- Battery Cleaning
- Battery Troubleshooting
- Battery Sensor Description
- Battery Sensor Removal
- Battery Sensor Installation
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)...
Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current ...
See also:
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
If the engine overheats
If your instrument cluster temperature gauge climbs into the red overheating zone, you experience a noticeable drop in engine power, or you hear unusual metallic pinging and knocking noises, your Kia ...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026