Kia Sorento: ESC Control Module Installation
Kia Sorento (XM, 2011-2015) Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC Control Module Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
| 3. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
1.
Turn the ignition switch OFF.
2.
Remove the surge tank. [G3.3 GDI]
(Refer to Engine Mechanical System - "Surge Tank")
...
ESC Control Module Removal
1. Front wheel speed sensor
2. Front wheel speed sensor connector...
Front Wheel Speed Sensor Components
See also:
Trunk Trim Replacement
Luggage Side Trim Replacement [7 seats]
...
Service Standard
Item
Specification
Ignition Timing ( ...
Rear Driveshaft Removal and Installation
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0529