Kia Sorento: Fluid Service Adjustment Procedure
Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Hydraulic System / Fluid Service Adjustment Procedure
| Oil level Check |
A check of ATF level is not normally required during scheduled
services. If an oil leak is found, perform the oil level check procedure
after replairs are completed.
|
When checking the oil level, be careful not to enter dust, foreign
matters, etc. from fill hole.
|
| 1. |
Remove the ATF Injection hole(eyebolt) (A).
|
| 2. |
Add ATF SP-IV 700cc to the ATF injection hole.
|
| 3. |
Start the engine. (Don |
1. ATF Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug...
Fluid Component Location
The ATF of the 6 speed automatic transaxle does not need to be
replaced.If the vehicle is used in severe conditions or business use,
replace AT...
Fluid Replacement
See also:
Rear Wiper Motor Installation
1.
Install the rear wiper motor assembly.
Tightening torque Nut :
7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft)
...
Rear Disc Brake Installation
1.
Installation is the reverse of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).
...
Rear Blower Resister Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0437