Kia Sorento: Front Bumper Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Body (Interior and Exterior) / Bumper / Front Bumper Replacement

•	Pry the trim off using a plastic trim tool and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

•	Take care not to scratch the body surface.

1.	Loosen the radiator upper cover mounting bolts and clips.

2.	Loosen the front bumper lower mounting clips.

3.	After loosening the front bumper side's mounting screw, then disconnect the side's.

4.	Disconnect the fog lamp connector (A). [LH] [RH]

5.	Remove the front bumper cover (A).

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Front Bumper Components

1. Front bumper cover 2. Front bumper lower stiffner 3. Front bumper upper stiffner 4. Front bumper side bracket...

Rear Bumper Components

1. Rear bumper cover 2. Rear bumper lower bracket [RH] 3. Rear bumper lower bracket [LH] 4. Rear bumper side bracket [RH] 5. Rear bumper side bracket [LH]...

Kia Sorento: Front Bumper Replacement

Front Bumper Components

Rear Bumper Components

See also:

Manuals list