Kia Sorento: Front Washer Motor Removal

-	When servicing the washer pump, be careful not to damage the washer pump seal.

-	Do not operate the washer pump before filling the washer reservoir. Failure to do so could result in premature pump failure.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper cover. (Refer to Body - "Front bumper")

3.	Remove the washer hose and disconnect the washer motor connector (A) and washer fluid level sensor connector (B).

4.	Remove the washer motor (A).

5.	Remove the washer reservoir after removing bolts (A).

Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...

1. Reassemble the washer reservoir. Before installing the pump motor, check the filt...

Manuals list