Kia Sorento: Battery Removal
Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System / Battery Removal
| 1. |
Disconnect the battery (-) terminal and (+) terminal (A).
|
| 2. |
Remove the battery mounting bracket (B) and the insulation pad
and then remove the battery (C).
|
| 3. |
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 4. |
Remove the battery tray (A) after removing the bolts (B).
|
1. Battery insulation pad
2. Battery
3. Battery tray
4. Battery mounting bracket...
Battery Components
1.
Install in the reverse order of removal.
Battery (-)terminal installation
nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
...
Battery Installation
See also:
Anti-Pinch Strip Installation
1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) batter ...
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0253