Kia Sorento: Fuel Filler Door Release Actuator Inspection
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Release Actuator Inspection
| 1. |
Remove the fuel filler cover (A) after loosening screws (2EA).
|
| 2. |
Remove the fuel filler door module (A).
|
| 3. |
Remove the rear 3rd seats.
(Refer to Body - "Rear seats")
|
| 4. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
| 5. |
Disconnect the fuel filler door release actuator connector (A).
|
| 6. |
Check for continuity between terminal No. 1 and No. 2. If there
is no continuity, replace the fuel filler door release actuator (A).
|
Component Location
1. Fuel filler door open switch
2. Fuel filler door release actuator...
Fuel Filler Door Open Switch Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front door")
2.
Disconnect the switch connector (A) from wiring.
...
See also:
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolt and nut, and then connect
the connector.
...
Phone
Before using the Bluetooth® Wireless Technology phone features
In order to use Bluetooth® Wireless Technology phone, you must first pair
and connect the Bluetooth® Wireless Technology mobile ...
Smart key unit Components
Connector Pin Information
No.
Connector A
Connector B
Connector C
1
V_BAT load
C_CAN Low
SSB illumination ground
2
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026