Kia Sorento: Inspection - Ignition Switch Assembly - Body Electrical SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Ignition Switch Assembly / Inspection

1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.

2.
Check for continuity between the terminals.
3.
If continuity is not specified, replace the switch.

Ignition Switch Assembly
...
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to Steering System - "Steering ...
See also:

Fuel Sender Installation
1. Install in the reverse order of removal. ...

High Mounted stop lamp Removal
High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to Body - " ...

Front Brake Caliper Repair procedures
Removal 1. Disconnect the (-) battery terminal. 2. Remove the front wheel and ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0495