Kia Sorento: Fuel Pump Removal - Fuel Delivery System - Engine Control / Fuel SystemKia Sorento: Fuel Pump Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Removal

1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line")
2.
Remove the rear seat.
(Refer to Body - “Rear Seat Assembly”)
3.
Remove the fuel pump service cover (A).

4.
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
5.
Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).

6.
Remove locking ring (A) by using the special service tool.

7.
Disconnector the vapor tube quck-connector (A) at the fuel pump, and then remove the fuel pump from the fuel tank.
  
Fuel shouldn’t be come inside the vapor tube quick-connector while disconnecting the vapor tube quick-connector.

Fuel Pump Inspection
[Fuel pump motor] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. ...
Fuel Pump Installation
1. Install in the reverse order of removal.    Be careful of fuel pump direction when i...
See also:

Rear Shock Absorber Installation
1. Installation is the reverse of removal.    After checking the distance 45 ...

Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
Rear Cross-Traffic Collision-Avoidance Assist detects vehicles approaching the rear of your vehicle from the left or right while reversing and uses a warning message and sound to warn you of a po ...

Emergency Door Locking Procedures
If the electrical power door lock switch becomes completely non-functional—such as when the Kia Sorento 12-volt battery is dead or drained—you cannot rely on standard central locking. In this ...

Copyright © xm.ksmanual.com 2014-2026