Kia Sorento: Inspection - Horn - Body Electrical SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Horn / Inspection

Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection
1.
Remove the horn relay (A) from the engine room relay box.
2.
There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals.
3.
There should be no continuity between the No.30 and No.87 terminals when power is disconnected.

Installation
1. Install the horns after connecting the horn connectors. 2. Install the head lamp. (Refer to "Lighting system")...
Adjustment
1. Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw.    ...
See also:

Rear Combination Lamp Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Open the rear co ...

Power Window Switch Components
Power Window Main Switch Passenger Power Window Switch Rear Power Window Switch ...

Risk of Burns When Parking or Stopping Your Vehicle. Vehicle Handling Instructions and Rollover Precautions
Risk of Burns When Parking or Stopping Your Vehicle Do not park, idle, or stop your Kia Sorento over or near flammable materials such as dry grass, fallen leaves, ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0517