Kia Sorento: Installation - Horn - Body Electrical SystemKia Sorento: Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Horn / Installation

1.
Install the horns after connecting the horn connectors.
2.
Install the head lamp.
(Refer to "Lighting system")
Removal
1. Remove the head lamp. (Refer to "Lighting system") 2. Remove the bolts and disconnect the horn connectors, then remove the high p...
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspectio...
See also:

Fluid Replacement
   The ATF of the 6 speed automatic transaxle does not need to be replaced.If the vehicle is used in severe conditions or b ...

Tail Gate Replacement
Tailgate Trim Replacement 1. Using a screwdriver or remover, remove the upper trim (B). 2. After loosening the mounting screws, then remove ...

Operation
Power Tailgate Opening ** - Primary switch signal received by PTGM via CAN bus (sent by IPM) PTGM Opening procedure: 1. Opening can be triggered after a signal i ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0315