Kia Sorento: High Mounted stop lamp Removal - Lighting System - Body Electrical SystemKia Sorento: High Mounted stop lamp Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Removal

High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to Body - "Body Side Moldings")
3.
Remove the high mounted stop lamp assembly after removing nuts (3EA).

License Lamps Installation
1. Install the bulb. 2. Install the license lamp lens....
High Mounted stop lamp Installation
1. Install the high mounted stop lamp. 2. Install the tailgate trim....
See also:

Smart key unit Components
Connector Pin Information No. Connector A Connector B Connector C 1 V_BAT load C_CAN Low SSB illumination ground 2 ...

Wheel Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Fuel Pump Inspection
[Fuel pump motor] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0644