Kia Sorento: Inspection
Throttle Position Sensor (TPS)
| 1. |
Connect the GDS on the Data Link Connector (DLC).
|
| 2. |
Start the engine and measure the output voltage of TPS 1 and 2
at C.T. and W.O.T.
|
| 3. |
Turn the ignition switch OFF and disconnect the scantool from
the DLC.
|
| 4. |
Disconnect the ETC module connector and measure the resistance
between the ETC module terminals 1 and 2.
|
ETC Motor
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the ETC module connector.
|
| 3. |
Measure resistance between the ETC module terminals 3 and 6.
|
| 4. |
Check that the resistance is within the specification.
|
Circuit Diagram
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the resonator and the air intake hose.
(Refer to Engi...
See also:
Panorama Sunroof Switch Components
...
Lubricants
Engine
Items
Specification
Capacity
Gasoline 3.3
Transfer oil
Hypoid gear oil API GL-5, SAE 75W/90 or equivalent
0.68 L
(0.18 U.S.g ...
A/C Pressure Transducer Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/charging station.
3.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026