Kia Sorento: Inspection - Heated Oxygen Sensor (HO2S) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) / Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
4.
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
5.
Check that the resistance is within the specification.

Specification: Refer to
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and then remove the sensor (B). ...
    See also:

    4WD ECU Power Flow Diagram
    ...

    Specification
    Tightening Torque Tightening Torque Seat Belt Pretensioner (BPT) Front Seat Belt Pretensioner (BPT) Item N·m ...

    Engine Mounting Removal and Installation
    Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0476