Kia Sorento: Removal - Heated Oxygen Sensor (HO2S) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the connector (A), and then remove the sensor (B).
  
Note that the SST (Part No.: 09392-2H100 or 09392-1Y100) is useful when removing the heated oxygen sensor.
[Bank 1 / Sensor 1]

[Bank 1 / Sensor 2]

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and ...
Installation
  ...
See also:

Rear Wheel Speed Sensor Removal
4WD only 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Wireless Charging Unit Description and Operation
Description During IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone. Schematic Diagram ...

Spark Plug Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and the carbon deposits accumulated on the spark plug(s) after long-term storage. [1st Method] 1. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0545