Kia Sorento: Inspection - 35R Clutch Control Solenoid Valve(35R/C_VFS) - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) / Inspection

1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
3.
Disconnect the solenoid valve connector (A).

4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the resistance is within the specification.
Circuit Diagram
...
Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pressure will...
See also:

BJ Boot Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Good driving practices. Moving up a steep grade from a standing start
Never move the gear shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal engaged. Never move the gear shift lever ...

Components
1. Steering column shaft 2. ECU 3. Motor 4. Steering gear box ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0519