Kia Sorento: Inspection (With GDS)
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Multifunction switch / Inspection (With GDS)
| 1. |
Check IPM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
|
| 2. |
If diagnosis is required on the multifunction switch, select model
and "IPM".
|
| 3. |
Select "Current data" and check the input/output condition of
"Multifunction switch".
|
| 4. |
To perform test on "Multifunction switch" outputs, select "Actuation
test".
|
Lighting Switch Inspection
1.
With the multi function switch in each position, make sure that
continuity exists between the terminals below.
If continuity is not a...
Inspection
...
Horn
See also:
Safe Exit Assist malfunction and limitations
Safe Exit Assist malfunction
(A) Check Driver Assistance system
...
Balance Shaft & Oil Pump Removal
BSM (Balance Shaft Module) Chain System
1.
Remove the timing chain.
(Refer to Timing System in this group)
2.
Install a stopper pin (A) ...
SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely
service by yourself. If the SRS air bag warning light does not illuminate, or continuously
remains on, have your vehicle ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0294