Kia Sorento: Inspection - Multifunction switch - Body Electrical SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Multifunction switch / Inspection

Lighting Switch Inspection
1.
With the multi function switch in each position, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch

Lighting switch (Auto light)

Lighting Switch

Dimmer And Passing Switch

Turn Signal Switch

Front Fog Lamp

Wiper And Washer Switch Inspection
1.
With the multi function switch in each position, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch.

Wiper Switch

Washer Switch

Rear Wiper Switch

Rear Washer Switch

Installation
1. Install the multifunction switch. 2. Install the clock spring and steering wheel. 3. Install the steering column upper ...
Inspection (With GDS)
1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. ...
See also:

OTA Update Sequence
OTA Update Sequence ...

Circuit Diagram
...

Rear combination lamp Removal
1. Disconnect the negative (-) battery terminal. [Outside] 2. Loose the screws (2EA) holding the rear combination lamp then disconn ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0501