Kia Sorento: Removal - Horn - Body Electrical SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Horn / Removal

1.
Remove the head lamp.
(Refer to "Lighting system")
2.
Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B).

Component Location
1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch) 4. Horn (High pitch) 5. Clock spring...
Installation
1. Install the horns after connecting the horn connectors. 2. Install the head lamp. (Refer to "Lighting system")...
See also:

Limitations of Forward Collision-Avoidance Assist
The operational range of the Forward Collision-Avoidance Assist system in your Kia Sorento may fluctuate depending on current traffic flow, the behavior of vehicles ahead, and environmental surro ...

AVN Head Unit Removal
   ...

Under Body (4WD)
Projected Dimensions * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Actual-Measurement Dimensions ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0512