Kia Sorento: Installation - Accelerator Position Sensor (APS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) / Installation

1.
Install in the reverse order of removal.

Accelerator pedal module installation nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...
Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solenoid...
See also:

Positive Crankcase Ventilation (PCV) Valve Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.    ...

Jack and tools. Jacking instructions. Removing and storing the spare tire
Jack and tools. Jacking instructions ...

Panorama Sunroof Motor Repair Procedures
Inspection 1. Disconnect the panorama sunroof wiring connector. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0492