Kia Sorento: Oil Cooler Installation - Lubrication System - Engine Mechanical SystemKia Sorento: Oil Cooler Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Installation

1.
Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B).

Tightening torque:
44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

  
Fix position of oil cooler stopper(A) where oil cooler resists on ladder frame stopper (B).

2.
Apply a light coat of engine oil to the oil filter packing surface (A), and then install the oil filter.

Tightening torque:
11.8 ~ 15.7 N.m (1.2 ~ 1.6 kgf.m, 8.7 ~ 11.6 lb-ft)

3.
Connect the oil cooler coolant hoses (B).

4.
Fill the radiator with coolant and check for leaks.
Oil Cooler Removal
1. Loosen the drain plug, and drain the coolant. Remove the radiator cap to help drain the coolant faster. 2. Disconnect the oil cooler coolant hoses ...
Oil Pan Removal
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the A/C compressor. (Refer to Heating, Ventilation, ...
See also:

Fuel Filter Removal and Installation
Removal 1. Remove the fuel pump module. (Refer to Fuel Delivery System - "Fuel Pump Module") ...

Water pump Components and Components Location
Components 1. Water pump pulley2. Water pump 3. Water pump gasket4. Water pump housing5. Water pump housing gasket ...

Description of ESC
Electronic Stability Control (ESC) recognizes critical driving conditions, such as panic reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and engine c ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0516