Kia Sorento: Oil Cooler Removal - Lubrication System - Engine Mechanical SystemKia Sorento: Oil Cooler Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Removal

1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap to help drain the coolant faster.
2.
Disconnect the oil cooler coolant hoses (A).

3.
Using the SST (09263-2E000), remove the oil filter (A).

4.
Loosen the mounting bolt (A) and remove the oil cooler assembly (B).

Engine Oil Inspection
1. Check the engine oil quality. Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil. 2...
Oil Cooler Installation
1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B). Tightening torque: ...
See also:

On Vehicle Inspection. Rear PWM-FET Removal and Installation
On Vehicle Inspection On Vehicle Inspection Diagnostic with KDS 1. The rear A/C system can be more quic ...

Air Cleaner Components
1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp 7. Air intake shield ...

Start/Stop Button Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0509