Kia Optima Manuals

Kia Sorento: Oil Pan Removal - Lubrication System - Engine Mechanical SystemKia Sorento: Oil Pan Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Oil Pan Removal

1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the A/C compressor.
(Refer to Heating, Ventilation, Air Conditioning - "Compressor")
3.
Remove the A/C compressor bracket (A).

4.
Drain the engine oil.
5.
Remove the oil pan (A). Insert the blade of SST (09215-3C000) between the ladder frame and oil pan. Cut off applied sealer and remove the lower oil pan.

  
    1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B). Tightening torque: ...
    1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...
    See also:

    Head Lamps Installation
    1. Install the head lamp bulbs. 2. Reassemble the head lamp bulb covers. 3. Reassemble the head lamp assembly a ...

    Inspection
    1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

    Hazard Lamp Switch Installation
    1. Install the heater control unit to the center fascia panel. 2. Install the center fascia panel. ...

    Manuals list

    Copyright © xm.ksmanual.com 2014-2026 - 0.0505