Kia Sorento: Output Speed Sensor Removal

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Removal

1.	Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body")

2.	Disconnect the input & output speed sensor connector (A).

3.

Remove the input & output speed sensor (B) after removing the bolts (2ea).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Output Speed Sensor Inspection

1. Check signal waveform of Input & output speed sensor using the GDS. Specification : Refer to "Signal Wave Form" section....

Output Speed Sensor Installation

1. Install in the reverse order of removal. • ...

See also:

Using the infotainment system or climate switchable controller
Press the button on the switchable controller to select the infotainment system or climate control panel. Press and hold the button to select the control panel’s default mode. Switching between ...

Installation
• Install the component with the specified torques. • ...

Rear Hub - Carrier Components
1. Rear carrier assembly 2. Parking brake assembly 3. Rear hub assembly 4. Rear brake disc ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026