Kia Sorento: Output Speed Sensor Installation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Output Speed Sensor Installation

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Installation

1.
Install in the reverse order of removal.
  
    1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed sensor connector...
    Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter....
    See also:

    Engine Control Module (ECM) Inspection
    Inspection 1. Test Engine Control Module (ECM) ground circuit : Measure resistance between ECM and chassis ground using the ...

    Telemetics Unit (TMU) Inspection
    1. After replacing the TMU unit, access Dealer Engineering Mode in head unit. (Refer to MTS system - "TMU Dealer Engineering Mode") 2 ...

    Starter Removal
    1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &quo ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0465