Kia Sorento: Parking Brake Assembly Removal
| 1. |
Raise the vehicle, and make sure it is securely supported.
|
| 2. |
Remove the rear tire and wheel.
|
| 3. |
Remove the rear brake caliper and Rear disc brake.
(Refer to "Rear disc brake removal")
|
| 4. |
Remove the parking brake cable (B), after removing the fixing
clip (A).
|
| 5. |
Remove the hub assembly.
(Refer to Driveshaft and axle - "Rear hub - carrier")
|
| 6. |
Remove the adjuster assembly (B) and the lower return spring (A).
|
| 7. |
Remove the upper return spring (C) operating lever assembly (D).
|
| 8. |
Remove the shoe hold down pin (A) and the spring (B) by pressing
and rotating the spring.
|
| 9. |
Remove the brake shoes (C).
|
Tightening Torque
Tightening Torque
Item
N·m
kgf·m
lb·ft
AWD ECM mounting nu ...
Description
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the ...
Crankshaft Position Sensor (CKPS) Specifications. Crankshaft Position Sensor (CKPS) Description and Operation
Crankshaft Position Sensor (CKPS) Specifications
Specification
Item
Specification
Operating vol ...