Kia Sorento: Parking Brake Pedal Assembly Removal - Parking Brake System - Brake SystemKia Sorento: Parking Brake Pedal Assembly Removal

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / Parking Brake System / Parking Brake Pedal Assembly Removal

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the junction box.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
4.
Disconnect the parking brake switch connector.
5.
Remove the parking brake cable mounting nuts (A).

6.
Remove the parking brake pedal mounting bolts (A) and nut (B).

7.
Remove the parking brake cable the fixing clip (A, B), and then remove the parking brake pedal.

Parking Brake Lever Assembly Adjustment
Parking Brake Lever Stroke Adjustment 1. Remove the floor console. (Refer to Body - "Floor console") 2. Apply the brake peda...
Parking Brake Pedal Assembly Installation
1. Install the holding clip (A, B) after fixing the parking brake cable. 2. Install the parking brake pedal, and then install the parking ...
See also:

ADAS Parking ECU (ADAS_PRK) On Vehicle Inspection
On Vehicle Inspection Diagnostic with KDS 1. The ADAS parking ECU can be more quickly diagnosed for problems with the KDS. (Refer to ...

Maintenance when towing a trailer. If you decide to tow a trailer
Maintenance when towing a trailer Your Kia Sorento will naturally require more frequent service inspections when you regularly engage in trailer towing. Essential operational components that dem ...

Room Lamp Removal
[General] 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver t ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0735