Kia Sorento: Anti-Pinch Strip Installation - Power Tailgate Module - Body Electrical SystemKia Sorento: Anti-Pinch Strip Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Tailgate Module / Anti-Pinch Strip Installation

1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) battery terminal.
Anti-Pinch Strip Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (Refer to Bod...
PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate") ...
See also:

Head Lamps Inspection
1. Check-points upon head lamp failure (HID) (1) Check the battery voltage. (Low beam will be on when the battery voltage above 9V.) ...

Head Lamps Replacement
Bulb (HID) 1. Turn the head lamp switch off. 2. Disconnect the power connector from the lamp. 3. Remove the ...

Tightening Torque
Tightening Torque Items N·m kgf·m lb·ft Air bleeding screw ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0796