Kia Sorento: Rear Blower Unit Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Recover the refrigerant with a recover/recycling/charging station.
|
| 3. |
When the engine is cool, drain the engine coolant from the radiator.
|
| 4. |
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
|
| 5. |
Remove the blower motor (B) after disconnecting the blower motor
connector (A) and loosening the mounting screws.
|
| 6. |
Install in the reverse order of removal.
|
Tire Wear
1.
Measure the tread depth of the tires.
Tread depth [limit] :
1.6 mm (0.0630 in.)
2.
If the re ...
Components and Components Location. Water Jacket Insert Repair procedures
Components and Components Location
Components
1. RH water jacket insert2. LH water jacket
insert3. Cylin ...