Kia Sorento: Rear Air Conditioner Unit Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Recover the refrigerant with a recover/recycling/charging station.
|
| 3. |
When the engine is cool, drain the engine coolant from the radiator.
|
| 4. |
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
|
| 5. |
Remove the rear wheel guard.
(Refer to Body - "Body Side Moldings")
|
| 6. |
Loosen the refrigerant line mounting nuts, and then remove the
rear refrigerant line (A).
|
| 7. |
Loosen the refrigerant line mounting bolts, and then remove the
rear upper refrigerant line (A).
|
| 8. |
Remove the rear heater unit after disconnecting the connectors
and loosening the mounting bolts.
|
| 9. |
Remove the evaporator core cover (A).
|
| 10. |
Remove the evaporator core (A).
|
| 11. |
Install in the reverse order of removal.
|
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolt and nut, and then connect
the connector.
...
Yaw-rate and G Sensor Installation
1.
Remove the ignition key from the vehicle.
2.
Install inthe reverse order of removal.
3.
After installing the ...
Fuel Pump Inspection
[Fuel pump motor]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...