Kia Sorento: Rear combination lamp Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Rear combination lamp Removal

1.	Disconnect the negative (-) battery terminal. [Outside]

2.	Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).

3.	Replace the bulbs (B) after removing the rear combination lamp assembly (A). [Inside]

4.	If the bulbs should be only replaced without removing lamp assembly, replace the bulbs after removing the rear combination lamp cover inside trunk.

5.	Remove the tail gate service covers (A) when removing the inside rear combination lamp assembly.

6.	Disconnect the lamp cover on tailgate. Remove the lamp assembly (A) after loosening nuts (3EA) and disconnecting the connector.

7.	Remove the tailgate combination lamp assembly (A) and then replace the bulbs (B).

8.	If the bulbs should be only replaced without removing lamp assembly, replace the bulbs after removing the tailgate lamp cover inside trunk.

Cargo Lamp Installation

1. Replace the lamp bulb. 2. Install the cargo lamp assembly after connecting the lamp connector....

Rear combination lamp Installation

1. Install the tailgate combination lamp assembly after replacing the bulb. 2. Install the lamp cover to the tailgate after connecting the lamp c...

See also:

IMS Control Switch Circuit Diagram
...

Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. Torque : 12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf. ...

Description
The 6-speed automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35R clut ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.0399