Kia Sorento: Pressure Sensor Removal

Kia Sorento (XM, 2011-2015) Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor Removal

1.	Remove the coupling assembly. (Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator Coupling")

2.	Remove the extensioncable (A).

3.

Remove the pressure sensor (A) with 24mm socket.

•	Keep going horizontal state to prevent leaks during remove the pressure sensor.

Tightening torque:

7.8 ~ 9.8 N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2 lb-ft)

Pressure Sensor Inspection

If you have trouble code related to the pressure sensor check pressure sensor according to the inspection process. Pressure Sensor ...

Pressure Sensor Installation

• Check the cleanliness of the pressure sensor before installation. • ...

See also:

Specifications
Items Specifications Rated voltage 5V Load Max. 1mA Detection illuminations Tail lamp ON : 2.7 ± 0.05 (V) OFF : 4.3 ...

Components
1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8. Timin ...

Fuel Pressure Control Valve
Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026