Kia Sorento: Rear Driveshaft Inspection - Rear Driveshaft Assembly - Driveshaft and axleKia Sorento: Rear Driveshaft Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Driveshaft and axle / Rear Driveshaft Assembly / Rear Driveshaft Inspection

1.
Check the driveshaft boots for damage and deterioration.
2.
Check the ball joint for wear and damage.
3.
Check the splines for wear and damage.

4.
Check the driveshaft for cracks and wears.
5.
Check the TJ outer race, inner race, cage and balls for rust or damage.
6.
Check for water, foreign matter, or rust in the BJ boot.
  
When the BJ assembly (A) is to be reused, do not wipe away the grease.
Check that there are no foreign substances in the grease. If necessary, clean the BJ assembly (A) and replace grease.

Rear Driveshaft Removal and Installation
1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
Rear Driveshaft Disassembly
  ...
See also:

Specification
Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20 ...

Battery replacement
A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace th ...

Tightening Torque
Tightening torque Charging system Alternator Item N·m kgf·m ...

Copyright © xm.ksmanual.com 2014-2026 - 0.054