Kia Sorento: Rear Stabilizer Bar Inspection - Rear Suspension System - Suspension SystemKia Sorento: Rear Stabilizer Bar Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Suspension System / Rear Suspension System / Rear Stabilizer Bar Inspection

1.
Check the rear stabilizer bar for deformation.
2.
Check the rear stabilizer link ball joint for damage.
Rear Stabilizer Bar Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
Rear Cross Member Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...
See also:

TPMS Sensor Description
1. Mode (1) Configuration State A. All sensors should be in the Low Line state. ...

Failure Diagnosis
1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is pr ...

Direct Electro Hydraulic Actuator Coupling Operation
Electronic Coupling [Inactive] [Active] Operation Order 1. 4WD ECU receives CAN signals from the vehicle's sensors. ...

Copyright © xm.ksmanual.com 2014-2026