Kia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS) / Removal

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Disconnect the engine coolant temperature sensor connector (A).

3.

Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.

Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.

1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of t...

...

See also:

Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Fuel Pump Installation
1. Install in the reverse order of removal. Be careful of fuel pump direc ...

Overhead Console Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the mounting screws (2EA). And then remove the overhead console (A). ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.0483