Kia Sorento: Inspection - Engine Coolant Temperature Sensor (ECTS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS) / Inspection

1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
4.
Check that the resistance is within the specification.

Specification: Refer to
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the engine coolant temperature sensor connector (A). ...
    See also:

    IMS Power Seat Control Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the power seat control switch connectors (A). (Refer to Body - "Front se ...

    Front fog light operation: (if equipped). High Beam Assist (HBA)
    Front fog light operation: (if equipped) Fog lights are designed to improve visibility in fog, rain, or snow. ...

    Emergency Fastening Device (EFD) Description
    Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0336