Kia Sorento: Removal - Fuel Tank Pressure Sensor (FTPS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the rear seat.
(Refer to Body - "Rear Seat Assembly")
3.
Remove the fuel pump service cover (A) in the trunk.

4.
Disconnect the fuel tank pressure sensor connector (A), and then remove the fuel tank pressure sensor.

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to &...
Installation
  ...
See also:

Parking Brake Lever Assembly Removal
   The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. ...

Rear Assist Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear assist arm for deformation. ...

Auto Light Switch Inspection
Operate the auto light switch, then check for continuity between terminals of multi-function switch connector. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0568