Kia Sorento: Removal - Line Pressure Control Solenoid Valve - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve / Removal

  
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pressure will need to be adjusted after replacing the VFS solenoid valve. If replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 3. ...
35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 35R Clutch....
See also:

Power Window Switch Components
Power Window Main Switch Passenger Power Window Switch Rear Power Window Switch ...

Seat belt precautions. Care of seat belts
Seat belt precautions Take the following vital precautions when using seat belts to ensure the maximum safety of all occupants traveling in your Kia Sorento. Infant or small child All 50 sta ...

Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service. Symbol Meaning Do ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0659