Kia Sorento: Room Lamp Inspection - Lighting System - Body Electrical SystemKia Sorento: Room Lamp Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Room Lamp Inspection

1.
Remove the room lamp assembly then check for continuity between terminals.
[Sunroof]

[General]

Head Lamps Adjustment
Head Lamp Aiming Instructions The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...
Room Lamp Removal
[General] 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver then...
See also:

Component Location
1. Start relay #2 (W/O immo./smart key) / ACC relay (With smart key) 2. Start relay #1 3. Windshield deicer relay 4. Power outlet relay 5. Wiper relay (low) 6. Burgla ...

Torque Converter Control Solenoid Valve (T/CON_VFS)
Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Power Door Mirror Actuator Inspection
1. Disconnect the negative (-) battery terminal. 2. Remove the driver door module. (Refer to Body - "Front door") ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0318