Kia Sorento: Room Lamp Installation - Lighting System - Body Electrical SystemKia Sorento: Room Lamp Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Room Lamp Installation

1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lamp lens after assembling the bulb.
Room Lamp Removal
[General] 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver then...
Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch....
See also:

Front Body E
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Hood hinge m ...

Engine Oil: Oil and filter replacement
   • Prolonged and repeated contact with mineral oil will result in the removal of natural fat ...

Starter Inspection
Starter Solenoid Inspection 1. Disconnect the lead wire from the M-terminal of solenoid switch. 2. Connect the battery as shown. If ...

Copyright © xm.ksmanual.com 2014-2026