Kia Sorento: Shift Cable Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Shift Cable Removal

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Removal

1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Disconnect the shift cable (A).

4.
Remove the retainer (A) and nut (B).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

5.
Remove the nut (C) from the manual control lever.

Tightening torque:
7.8~11.8 N.m (0.8~1.2 kgf.m, 5.8~8.7 lb-ft)

6.
Remove the cable (B) from the bracket (A) at transaxle assembly side.
7.
Remove the shift cable by pulling it toward the interior.

Shift Cable Components
1. Shift lever mounting bolt 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer...
Shift Cable Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor switch man...
See also:

Vehicle Stability Management (VSM) system. Trailer Stability Assist (TSA) system
Vehicle Stability Management (VSM) system The Vehicle Stability Management (VSM) system works in harmony with the Electronic Stability Control and Motor-Driven Power Steering to further enhance ...

Vehicle Data Collection and Event Data Recorders (EDR)
This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record data in certain crash or near crash-like situations—such as an air bag deployment or striking ...

Navigation-based Smart Cruise Control settings. Auto Highway Speed Change. Navigation-based Smart Cruise Control operation
Navigation-based Smart Cruise Control settings. Auto Highway Speed Change Auto Highway Speed Change Configuration Interface Navigation Steps ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0501