Kia Sorento: Side Impact Sensor (SIS) Description
Kia Sorento (XM, 2011-2015) Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two Front-SIS which are installed
at each center of the front door module (LH and RH) and two Rear-SIS which are
installed at each rear pillar nearby (LH and RH).
Front-Side Impact Sensor (F-SIS) is also called P-SIS because that detects
pressure due to collision at its mounting location.
Rear-Side Impact Sensor (R-SIS) is also called A-SIS because that detects
acceleration.
SRSCM decides deployment or not of the airbag and the time of deployment
through the collision signal of SIS when the collision occurred.
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacing the front impact sensor....
Side Impact Sensor (SIS) Components
See also:
Installation
•
Install the component with the specified torques.
•
...
Rear Disc Brake Inspection
Rear Brake Disc Thickness Check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
Engine And Transmission Assembly Removal
•
Use fender covers to avoid damaging painted surfaces.
•
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026