Kia Sorento: Side Impact Sensor (SIS) Removal

Kia Sorento (XM, 2011-2015) Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Removal

Front Side Impact Sensor

•	Removal of the airbag must be performed according to the precautions/procedures described previously.

•	Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).

•	Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front door trim. (Refer to the Body group- Front door)

3.	Disconnect the front side impact sensor connector and remove the front side impact sensor mounting screws.

Rear Side Impact Sensor

1.	Disconnect the battery negative cable and wait for at least three minutes before beginning work.

2.	Remove the rear seat. (Refer to the Body group- Seat)

3.	Remove the luggage side trim. (Refer to the Body group - Interior trim)

4.	Disconnect the rear side impact sensor connector.

5.	Loosen the rear side impact sensor mounting bolt and remove the rear side impact sensor.

Side Impact Sensor (SIS) Components

...

Side Impact Sensor (SIS) Installation

Front Side Impact Sensor • Do not turn the ignition switch ON and do not connect ...

See also:

Circuit Diagram
...

Troubleshooting
Symptom Suspect area Engine will not start or stuggle to start Vapor hose damaged or disconnected Engine stuggle to start Malfunction of the Purge ...

Automatic climate control system (If equipped)
1. A/C display 2. Driver's temperature control knob 3. AUTO (automatic control) button 4. Front blower OFF button 5. Front fan speed control switch 6. Mode selection button 7. Dual tempera ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026