Kia Sorento: Smart key unit Inspection - Smart key System - Body Electrical SystemKia Sorento: Smart key unit Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Smart key System / Smart key unit Inspection

Smart Key Unit
-
Refer to BE group - inspection / self diagnosis with scan tool.
Smart Key Switch
-
Refer to BE group - inspection / self diagnosis with scan tool.
Antenna
-
Refer to BE group - inspection / self diagnosis with scan tool.
Tailgate Switch
1.
Check for continuity between the tailgate latch terminals.

2.
If continuity is not specified, inspect the switch

Smart key unit Removal
Smart Key Unit 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Crash pad&q...
Smart key unit Installation
Smart Key Unit 1. Install the smart key unit. 2. Install the smart key unit mounting bolt and nut, and then connect the connector. ...
See also:

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Circuit Diagram
...

Be sure the exhaust system does not leak
Perform regular visual checks on the exhaust system of your Kia Sorento whenever the vehicle is elevated on a lift for routine oil changes, seasonal tire rotations, or any other underbody mainten ...

Copyright © xm.ksmanual.com 2014-2026