Kia Sorento: Smart key unit Installation - Smart key System - Body Electrical SystemKia Sorento: Smart key unit Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Smart key System / Smart key unit Installation

Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolt and nut, and then connect the connector.
3.
Install the glove box.
4.
Install the negative (-) battery terminal and check the smart key system.
Interior 1 Antenna
1.
Install the interior 1 antenna.
2.
Install the console assembly.
3.
Install the negative (-) battery terminal and check the smart key system.
Interior 2 Antenna
1.
Install the interior 2 antenna.
2.
Install the connector mounting bracket.
3.
Install the console rear cover after connecting the connector.
4.
Install the negative (-) battery terminal and check the smart key system.
Interior 3 Antenna
1.
Install the interior 3 antenna.
2.
Install the third seat assembly.
3.
Install the negative (-) battery terminal and check the smart key system.
Exterior Bumper Antenna
1.
Install the exterior bumper antenna.
2.
Install the rear bumper.
3.
Install the negative (-) battery terminal and check the smart key system.
Buzzer
1.
Install the buzzer.
2.
Install the front left wheel guide.
3.
Install the negative (-) battery terminal and check the smart key system.
Door Outside Handle
1.
Install the outside handle.
2.
Install the door trim.
3.
Install the negative (-) battery terminal and check the smart key system.
Tailgate Switch
1.
Install the tailgate switch.
2.
Install the tailgate garnish.
3.
Install the tailgate trim.
4.
Install the negative (-) battery terminal and check the smart key system.
Smart key unit Inspection
Smart Key Unit - Refer to BE group - inspection / self diagnosis with scan tool. Smart Key Switch - Refer to BE group - inspection / self diagnos...
Smart Key Diagnostic Inspection
Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The following three ...
See also:

Rear Mud Guard Repair Procedures. Roof Rack Repair Procedures
Rear Mud Guard Repair Procedures Removal 1. Remove the rear mud guard (A) after removing the screws and fasteners. ...

Troubleshooting
Symption Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Loose or out of specification engine flywhe ...

Tightening Torque
Tightening Torque Automatic Transaxle Assembly Item N·m kgf·m ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0821