Kia Sorento: Specification - Injector - Engine Control System - Engine Control / Fuel SystemKia Sorento: Specification

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Injector / Specification

Item
Specification
Coil Resistance (Ω)
1.18 ~ 1.31 [20
    Injector
    The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits the n...
    Signal Waveform
    The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (g...
    See also:

    Valve Body Removal
    1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

    Description
    Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes re ...

    Smart Key
    Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0586