Kia Sorento: Injector - Engine Control System - Engine Control / Fuel SystemKia Sorento: Injector

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Injector

The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits the nozzle. This aids in atomization of the fuel.The ECM controls both the feed circuits (high side) to feed voltage to the injectors and the ground circuits (low side) to energize the injectors. Also, the feed for 2 injectors comes from the same driver set. As the ignition coils are paired with cylinders (1-4 and 2-3), the injectors are also set up in pairs.

Installation
  ...
Specification
Item Specification Coil Resistance (Ω) 1.18 ~ 1.31 [20...
See also:

Specifications
ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

If the engine overheats. In case of an emergency while driving
If the engine overheats If your instrument cluster temperature gauge climbs into the red overheating zone, you experience a noticeable drop in engine power, or you hear unusual metallic pinging and k ...

Lane-Change Oncoming function: (if equipped). Lane-Change Side function: (if equipped)
Lane-Change Oncoming function: (if equipped) Lane-Change Oncoming functions for Forward Collision-Avoidance Assist on your Kia Sorento are: Collision Warning Eme ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0439